Power Surge Protector
 
Power DC Surge Protector
 
Power Outlet Surge Protector
 
Power Line Protector
 
Signal & Data Line Protector
 
Coaxial Cable Surge Protector
 
Telephone Line Surge Protector
 
Lightning Surge Protector for
Data Line Networking System
 
RS232 Surge Protector
 
Compact Power Surge Protector 240 VAC
 
i-Smart Surge Protector

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Power Surge Protector
 
  DESCRIPTION
MARSA Surge Protector are designed to protect single phase and three phase electrical supply system. Installed parallel to incoming power feeder. The range of products can divert up to 80kA surge current per phase (L-N), (L-E), (N-E) generated in electrical power line to the earth, Protection is effective in diverting the lightning surge, internally generated and over-charging transient conditions.

 

  FEATURES AND BENEFITS
  • Full mode protection with 7 MOV. All mode protection covers Line-Natural (L-N), Line-Earth (L-E) and Neutral-Earth (N-E).
  • Monoblock protection and each mode protection by single MOV with the same current rating.
  • Ensure reliability of surge protector to the facilities and equipment.
  • Transient over current protector.
  • Double protection unit suitable to Malaysia extreme lightning condition and frequency.
  • Provide light indicator.
 
  Single Phase

PSP1-20240

  • Withstand surge current 20kA per phase (L-N), (L-E), (N-E).
  • Designed for single phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 35 mm² or less.
  • Suitable for electrical, electronic and mechanical equipment (control system).
     

PSP1-40240

  • Withstand surge current 40kA per phase (L-N), (L-E), (N-E).
  • Designed for single phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 95 mm² or less.
  • Suitable for electrical, electronic and mechanical equipment (control system).
  Three Phase

PSP1-20415

  • Withstand surge current 20kA per phase (L-N), (L-E), (N-E).
  • Designed for three phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 35 mm² or less.
  • Suitable for electrical, electronic and mechanical equipment (control system).

 
PSP1-40415

  • Withstand surge current 40kA per phase (L-N), (L-E), (N-E).
  • Designed for three phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 95 mm² or less.
  • Suitable for electrical, electronic and mechanical equipment (control system).

PSP1-80415

  • Withstand surge current 80kA per phase (L-N), (L-E), (N-E).
  • Designed for three phase power line. Suitable for main Switch Board, Sub Switch and Distribution Board, with incoming cable 95 mm² or more.
  • Suitable for electrical, electronic and mechanical equipment (control system).
     
Standard of Compliances
 
Approved By
 
Standard of References
  • MS IEC 61643-1
  • MS IEC 61643-12
 
  • JKR Electrical Material Approved List (EMAL)
 
  • IEEE C62.41
  • BS 6651
 
 
  Important
  • The product is warranted only for manufacturing defects. The warranty period is two years and began on the date of purchased.
  • The warranty does not apply to for any misused, altered, neglected or damaged by accident or abnormal conditions of operation or handling.
  • Warranty is only valid if the products is purchased through an approved MARSA distributor only.
 
 
  Copyright © 2010 VLP Engineering Sdn Bhd. All rights reserved.